Shop for Power Filters

Great for increasing oxygenation and circulationIdeal for deep gravel beds and undergravel filtersPerfect for small aquariums and turtle or amphibian tanksHelps your undergravel filter stay cleaner and operate more efficiently. This kit converts any Penguin Powerhead to reverse flow. Allows filtered, oxygen-rich water to be pumped down through your lift tube and underneath the undergravel filter plate. Bacteria are encouraged to grow from the bottom up, where it's less likely to be disturbed, while debris in the gravel are pushed into the tank where your filter can remove it. Also great as a pre-filter on a powerhead used for circulation. Only for use with Penguin Powerheads, not included.Please click on "More Information" for installation and maintenance.Sponge Pre-filter Kit Contains:-->Pre-filter Core and Adapter replaces standard power head strainer to adapt to pre-filter sponge.-->Replacement Pre-Filter Sponge for the Penguin Powerhead Reverse Flow Filter Kit. Open cell Sponge Pre-filter traps more dirt, protects against impeller damage, and prevents heavy waste buildup in gravel bed and its reusable.1/2" Straight Barbed Adapter connects to 1/2" tubing to create dramatic waterfall effects.Air Inlet Plug protects fish and helps ensure 100 percent reverse flow.Reverse Flow Elbow fits virtually all-larger diameter undergravel filter lift tubes.-->Installation:If you are converting a powerhead you are currently using, unplug and remove the unit and carefully clean. Remove all parts except the motor housing, impeller assembly, and impeller housing.Slide the Sponge Pre-filter over the core as far as possible. Core and Sponge slide onto the bottom of the impeller housing. The Reverse Flow Elbow slides over the outlet and the Air Inlet Plug is installed. Failure to use the Air Inlet Plug can cause water to be forced vertically out the air inlet when backpressure is present.Installing the Powerhead back in the aquarium: The converted Penguin Reverse Flow Powerhead is in

For fresh and saltwater aquariumsRemoves particles as small as 1 micronIdeal for polishing water after maintenanceThis filter fits AquaClear Powerheads (except models 110 and 901), and is ideal for polishing water after maintenance. Turns your powerhead into a "Quick Filter" for rapid removal of most particulate waste (as small as 1-micron). Includes extra-fine weave of duo-density polyester pad and internal frame to prevent pad from clogging input to powerhead. Use continuously or periodically when needed. Also allows for extra circulation when needed without the risk of the powerhead drawing in small fish or anemone. Powerhead not included. Filter measures 2-1/2" diameter x 7" high.Please click on "More Information" for instructions on filter usage.

For fresh and saltwater aquariumsRemoves particles as small as 1 micronIdeal for polishing water after maintenanceThis filter fits AquaClear Powerheads (except models 110 and 901), and is ideal for polishing water after maintenance. Turns your powerhead into a "Quick Filter" for rapid removal of most particulate waste (as small as 1-micron). Includes extra-fine weave of duo-density polyester pad and internal frame to prevent pad from clogging input to powerhead. Use continuously or periodically when needed. Also allows for extra circulation when needed without the risk of the powerhead drawing in small fish or anemone. Powerhead not included. Filter measures 2-1/2" diameter x 7" high.Please click on "More Information" for instructions on filter usage.

For fresh and saltwater aquariumsRemoves particles as small as 1 micronIdeal for polishing water after maintenanceThis filter fits AquaClear Powerheads (except models 110 and 901), and is ideal for polishing water after maintenance. Turns your powerhead into a "Quick Filter" for rapid removal of most particulate waste (as small as 1-micron). Includes extra-fine weave of duo-density polyester pad and internal frame to prevent pad from clogging input to powerhead. Use continuously or periodically when needed. Also allows for extra circulation when needed without the risk of the powerhead drawing in small fish or anemone. Powerhead not included. Filter measures 2-1/2" diameter x 7" high.Please click on "More Information" for instructions on filter usage.

For fresh and saltwater aquariumsRemoves particles as small as 1 micronIdeal for polishing water after maintenanceThis filter fits AquaClear Powerheads (except models 110 and 901), and is ideal for polishing water after maintenance. Turns your powerhead into a "Quick Filter" for rapid removal of most particulate waste (as small as 1-micron). Includes extra-fine weave of duo-density polyester pad and internal frame to prevent pad from clogging input to powerhead. Use continuously or periodically when needed. Also allows for extra circulation when needed without the risk of the powerhead drawing in small fish or anemone. Powerhead not included. Filter measures 2-1/2" diameter x 7" high.Please click on "More Information" for instructions on filter usage.

Natural antifungal remedy extracted from west indian bay trees safe for even the most delicate fresh & saltwater fish able to peg hook for alternate placement in store treats 118 u.s. gallons

Product Details
Shake well add 1 tsp per 10 u.s. gallons of aquarium water dose daily for 7 days after 7 days make a 25% water change treatment can be continued if necessary
Pimenta racemosa

Aquarium filter media reactor for enhanced chemical filtrationUp-flow principle maximizes efficient use of chemical filter mediaOptimize chemical filtration to improve aquarium water qualityThe PhosBan Reactor maximizes efficient use of chemical filter media. Up-flow principle pushes water from the bottom upward through the dispersion plate to gently fluidize chemical filter media. Even distribution of aquarium water through the PhosBan Reactor increases media contact for optimized use of PhosBan or other chemical filter media. Includes barbed hose connections for 1/2" ID tubing and ball valve to fine tune flow rate. Appropriate size pump, tubing, and media required (not included). Multiple reactors may be used for larger aquariums. NEW larger capacity PhosBan Reactor 550 now available for use with aquariums up to 600 gallons The pump should have 100-200 gph (380-760 l/hr) capacity, although the flow must be reduced using the supplied ball valve. ModelMedia CapacityOperating Flow RateAquarium SizeDimensions 150200 grams20-30 gph150 gallons4-1/2" x 4" x 17-1/2" high 550750 grams20-40 gph600 gallons5" x 6" x 15" highUse with PhosBan to safely keep phosphate levels low in freshwater and marine (including reef) aquariums for several months. Highly porous, super adsorbent, ferric oxide hydroxide-based media effectively binds large amounts of phosphate, organic compounds, and other pollutants. Won't leach pollutants, even when fully saturated. PhosBan Reactor Extension Kit for Reactor 150: Contains parts to convert the PhosBan Reactor 150 for convenient hang-on installation on aquarium or on the side of a filter sump.Downloadable PhosBan Reactor 150 Instructions PDF and PhosBan Reactor 550 Instructions PDF. (Requires Adobe Acrobat Reader 4.0 or later - get it here for free)Please click on "More Information" for operating instructions.

Aquarium filter media reactor for enhanced chemical filtrationUp-flow principle maximizes efficient use of chemical filter mediaOptimize chemical filtration to improve aquarium water qualityThe PhosBan Reactor maximizes efficient use of chemical filter media. Up-flow principle pushes water from the bottom upward through the dispersion plate to gently fluidize chemical filter media. Even distribution of aquarium water through the PhosBan Reactor increases media contact for optimized use of PhosBan or other chemical filter media. Includes barbed hose connections for 1/2" ID tubing and ball valve to fine tune flow rate. Appropriate size pump, tubing, and media required (not included). Multiple reactors may be used for larger aquariums. NEW larger capacity PhosBan Reactor 550 now available for use with aquariums up to 600 gallons The pump should have 100-200 gph (380-760 l/hr) capacity, although the flow must be reduced using the supplied ball valve. ModelMedia CapacityOperating Flow RateAquarium SizeDimensions 150200 grams20-30 gph150 gallons4-1/2" x 4" x 17-1/2" high 550750 grams20-40 gph600 gallons5" x 6" x 15" highUse with PhosBan to safely keep phosphate levels low in freshwater and marine (including reef) aquariums for several months. Highly porous, super adsorbent, ferric oxide hydroxide-based media effectively binds large amounts of phosphate, organic compounds, and other pollutants. Won't leach pollutants, even when fully saturated. PhosBan Reactor Extension Kit for Reactor 150: Contains parts to convert the PhosBan Reactor 150 for convenient hang-on installation on aquarium or on the side of a filter sump.Downloadable PhosBan Reactor 150 Instructions PDF and PhosBan Reactor 550 Instructions PDF. (Requires Adobe Acrobat Reader 4.0 or later - get it here for free)Please click on "More Information" for operating instructions.

Aquarium filter media reactor for enhanced chemical filtrationUp-flow principle maximizes efficient use of chemical filter mediaOptimize chemical filtration to improve aquarium water qualityThe PhosBan Reactor maximizes efficient use of chemical filter media. Up-flow principle pushes water from the bottom upward through the dispersion plate to gently fluidize chemical filter media. Even distribution of aquarium water through the PhosBan Reactor increases media contact for optimized use of PhosBan or other chemical filter media. Includes barbed hose connections for 1/2" ID tubing and ball valve to fine tune flow rate. Appropriate size pump, tubing, and media required (not included). Multiple reactors may be used for larger aquariums. NEW larger capacity PhosBan Reactor 550 now available for use with aquariums up to 600 gallons The pump should have 100-200 gph (380-760 l/hr) capacity, although the flow must be reduced using the supplied ball valve. ModelMedia CapacityOperating Flow RateAquarium SizeDimensions 150200 grams20-30 gph150 gallons4-1/2" x 4" x 17-1/2" high 550750 grams20-40 gph600 gallons5" x 6" x 15" highUse with PhosBan to safely keep phosphate levels low in freshwater and marine (including reef) aquariums for several months. Highly porous, super adsorbent, ferric oxide hydroxide-based media effectively binds large amounts of phosphate, organic compounds, and other pollutants. Won't leach pollutants, even when fully saturated. PhosBan Reactor Extension Kit for Reactor 150: Contains parts to convert the PhosBan Reactor 150 for convenient hang-on installation on aquarium or on the side of a filter sump.Downloadable PhosBan Reactor 150 Instructions PDF and PhosBan Reactor 550 Instructions PDF. (Requires Adobe Acrobat Reader 4.0 or later - get it here for free)Please click on "More Information" for operating instructions.

Replacement BIO-Wheel Assembly and Bearings for Penguin power filters. These parts fit the new Penguin power filter models.BIO-Wheel Bearings (mfg# PR 1910B) These plastic bearings allow secure and proper rotation of the BIO-Wheel Assembly. For Penguin Power Filter Models PF99B, PF125B, PF170B, and PF330B. Package of 2.BIO-Wheel Assembly The BIO-Wheel Assembly should be replaced only when damaged. The BIO-Wheel assembly houses beneficial bacteria necessary for efficient biological filtration in your aquarium. Unnecessary removal or replacement of the BIO-Wheel Assembly may compromise biological filtration in your aquarium. BIO-Wheel Assemblies available for Penguin Power Filter Models PF100B, PF150B, PF200B, and PF350B.Impeller Assembly Over time, natural wear of the impeller may reduce filter performance. Replace the impeller to ensure reliable performance. Replacement Impeller Assemblies are available for Penguin Power Filter Models PF100B, PF150B, PF200B, and PF350B.