Shop for Horse Barn & Trailer

This stall guard chain has a rubber covering over it to protect the horse. Measures 42" inches wide.

This stall guard chain has a rubber covering over it to protect the horse. Measures 42" inches wide.

This stall guard chain has a rubber covering over it to protect the horse. Measures 42" inches wide.

This stall guard chain has a rubber covering over it to protect the horse. Measures 42" inches wide.

Spinning toy for horses - relieves boredom Mounts in corner of horse's stall Releases a pleasant apple scent Reduce your horse's stall boredom with this entertaining toy. As horse nuzzles toy, center rotates and releases a pleasant apple scent. Raised nubs on surface of toy massage her gums. Helps prevent boredom that leads to destructive chewing and cribbing. Made from a super strong polymer. Hangs securely in corner of stall - mounting hardware included. Red color. 4" diameter x 9-1/2" long.Please click on "More Information" for mounting instructions and playtime recommendations.

Toy for Horses

Instant shelter protects horses from sun, wind, rain, snow, and moreHigh grade tubular steel frame supports a three-layer polyethylene coverSets up quickly and also functions to store hay and farm equipmentOffer an entire herd of horses protection while in the pasture. Large equine run-in sheds combine tubular steel frames with a one-piece fitted, UV-treated polyethylene cover. Sets up in minutes to offer the ultimate protection from sunlight, wind, rain, snow, sleet, and more. Tubular steel frames are prepared with a 13-step Rhino Shield process and bonded with a Dupont thermoset powder-coat finish that resists chips, peels, rust, and corrosion. Ripstop cover is fashioned from three-layers of chemically heat-bonded polyethylene fabric with hot air fused seams for 100 percent waterproof protection. Cover is UV-treated inside and out with added fade blockers, anti-aging, and anti-fungal agents that further resist sun, weather, and mold growth. High profile white interior lining reflects light for enhanced illumination. Installs easily with slip fit connectors, bolt hardware, heavy-duty corner braces, ground anchors, and Ratchet Tite tension system. Peaked design in two huge sizes with 2-3/8" outside diameter tubular steel frame is also perfect for hay and farm equipment storage. Green. Includes: All steel frame, fitted polyethylene cover, protective corner boots, steel foot plates, 30" auger anchors, hardware kit, easy step-by-step assembly instructions. Round Run-In Shed is also available in three sizes.Please click on "More Information" for parts list , further details, and run-in shed benefits.

Instant shelter protects horses from sun, wind, rain, snow, and moreHigh grade tubular steel frame supports a three-layer polyethylene coverSets up quickly and also functions to store hay and farm equipmentOffer an entire herd of horses protection while in the pasture. Large equine run-in sheds combine tubular steel frames with a one-piece fitted, UV-treated polyethylene cover. Sets up in minutes to offer the ultimate protection from sunlight, wind, rain, snow, sleet, and more. Tubular steel frames are prepared with a 13-step Rhino Shield process and bonded with a Dupont thermoset powder-coat finish that resists chips, peels, rust, and corrosion. Ripstop cover is fashioned from three-layers of chemically heat-bonded polyethylene fabric with hot air fused seams for 100 percent waterproof protection. Cover is UV-treated inside and out with added fade blockers, anti-aging, and anti-fungal agents that further resist sun, weather, and mold growth. High profile white interior lining reflects light for enhanced illumination. Installs easily with slip fit connectors, bolt hardware, heavy-duty corner braces, ground anchors, and Ratchet Tite tension system. Peaked design in two huge sizes with 2-3/8" outside diameter tubular steel frame is also perfect for hay and farm equipment storage. Green. Includes: All steel frame, fitted polyethylene cover, protective corner boots, steel foot plates, 30" auger anchors, hardware kit, easy step-by-step assembly instructions. Round Run-In Shed is also available in three sizes.Please click on "More Information" for parts list , further details, and run-in shed benefits.

PROMOTION For a limited time, this package includes Three (3) Pipe Clamp Insulator 12-Packs plus an extra one FREE! (*While Supplies Last) Field Guardian® Pipe Clamp Insulators (12-Packs) Install this insulator and get your horses' respect by mounting a scare wire. Our special insulator attaches to the side of your pipe panels without drilling a hole in the pipe. The clamp can be mounted on the horizontal or vertical section of the panel. The hot wire can be positioned as needed, a point midway up is preferred, although stallions may need a high wire to keep them from "necking" over the fence. Place it on both sides of adjoining pastures to reduce horse mischief to a minimum. We strongly suggest using polyrope or 1/2" tape to prevent injuries caused by hot wire. These insulators are an economical and practical way to protect your pipe panel fences. Sizes and specifications The pipe clamp insulators are 3.5" inches in length and they adjust for pipe diameters from 1 1/2" up to 1 5/8". (In order to make them fit 1 7/8" pipes, you will need to get 1.5" screws - not included in these). These sizes should fit most pipe panels, heavy duty fences as well as some cyclone fence posts. The pipe clamps are constructed of a high grade of poly plastic with UV inhibiters and flex agents added. This means that they will last for years without cracking; however, this also means that they cost a bit more than T-post style snap on insulators. Installation Instructions Select the location for the insulator. Snap the clamp over the pipe. If you are using the clamp on small diameter pipe, use the short screw in the top hole. If you are using it on a 1 7/8" pipe, use the longer screw in the bottom hole. Tighten the screw to fix the position on the pipe. Do not over-tighten.

PROMOTION For a limited time, this package includes Three (3) Pipe Clamp Insulator 12-Packs plus an extra one FREE! (*While Supplies Last) Field Guardian® Pipe Clamp Insulators (12-Packs) Install this insulator and get your horses' respect by mounting a scare wire. Our special insulator attaches to the side of your pipe panels without drilling a hole in the pipe. The clamp can be mounted on the horizontal or vertical section of the panel. The hot wire can be positioned as needed, a point midway up is preferred, although stallions may need a high wire to keep them from "necking" over the fence. Place it on both sides of adjoining pastures to reduce horse mischief to a minimum. We strongly suggest using polyrope or 1/2" tape to prevent injuries caused by hot wire. These insulators are an economical and practical way to protect your pipe panel fences. Sizes and specifications The pipe clamp insulators are 3.5" inches in length and they adjust for pipe diameters from 1 1/2" up to 1 5/8". (In order to make them fit 1 7/8" pipes, you will need to get 1.5" screws - not included in these). These sizes should fit most pipe panels, heavy duty fences as well as some cyclone fence posts. The pipe clamps are constructed of a high grade of poly plastic with UV inhibiters and flex agents added. This means that they will last for years without cracking; however, this also means that they cost a bit more than T-post style snap on insulators. Installation Instructions Select the location for the insulator. Snap the clamp over the pipe. If you are using the clamp on small diameter pipe, use the short screw in the top hole. If you are using it on a 1 7/8" pipe, use the longer screw in the bottom hole. Tighten the screw to fix the position on the pipe. Do not over-tighten.