Shop for Reptile Lighting

Create the ideal lighting conditions for your reptile with the Exo Terra Dual Top UV Light and Basking Spot Terrarium Canopy. This fluorescent and halogen combination terrarium canopy is designed to use with the Exo Terra Glass Terrarium and when a combination of two Exo Terra Repti-Glo bulbs are used, can create the ideal ultraviolet, visual light, and heat combination for your reptile. This durable aluminum canopy comes with two fixtures for two linear 15W fluorescent bulbs, plus one or two ceramic GU-10 fittings for the 35W Exo Terra Sun-Glo Halogen. Great for use with a variety of Exo Terra lighting and temperature monitoring equipment, the Exo Terra Dual Top UV Light and Basking Spot Terrarium Canopy can be used to provide optimal lighting and heating so your reptile stay happy and healthy.

This broad spectrum daylight lamp for terrariums features a Neodymimim sleeve. Combine with Night Glo or Heat Glo (sold separately) to create a 24 hour cycle.

Pre-assembled light fixture with a Super-UV fluorescent lamp included. It's easy to install and ideal for areas with limited space.

Invisible to reptiles and does not disturb normal day/night cycles.

An electronic ballast, timer, and dusk-to-dawn simulator in one convenient light cycle unitGradually dims fluorescent tube bulbs for natural dusk and dawn effectNo flickering - less stressful for pet reptiles and amphibians Simulate natural lighting cycles, like sunrise and sunset, in your reptile's terrarium. Light cycle unit is more energy efficient than conventional ballasts and strip lights and eliminates flickering light, so there's less stress on reptiles. Innovative controllers feature water-resistant end caps for maximum safety and long, flexible end-cap leads, built-in timer, and on/off switch for added convenience. Units measure 7-5/8" x 4-1/8". Each unit fits two T10 or T8 fluorescent bulbs (not included). Position bulbs on top of terrarium's metal screen cover. The timer can be set for three lighting periods - 10, 12 or 14 hours - to simulate the various seasonal daylight cycles found in nature. When a daytime cycle starts, it takes about 30 minutes for the light output of the bulb to reach 100 percent, simulating a natural dawn. At the end of each daytime cycle, it takes about 30 minutes to go from 100 percent light output to 0 percent, simulating a natural dusk. This is less stressful for the animals as it gives them time to retreat into their burrows or hiding places and even stimulates breeding behavior in many species of reptiles. Fits two T8 or T10 fluorescent bulbs Type Maximum wattage for each bulb Maximum length for each bulb 2 x 20W 20 Watts24" 2 x 30W 30 Watts36" 2 x 40W 40 Watts48" To attach T8 bulbs to a terrarium canopy, use convenient Coralife Heavy Duty Clips (sold separately). The clips are constructed of durable K-Resin to produce a rugged clip capable of withstanding harsh conditions of the terrarium. Please click on "More Information" for directions for use, safety, installation, maintenance, and more.

An electronic ballast, timer, and dusk-to-dawn simulator in one convenient light cycle unitGradually dims fluorescent tube bulbs for natural dusk and dawn effectNo flickering - less stressful for pet reptiles and amphibians Simulate natural lighting cycles, like sunrise and sunset, in your reptile's terrarium. Light cycle unit is more energy efficient than conventional ballasts and strip lights and eliminates flickering light, so there's less stress on reptiles. Innovative controllers feature water-resistant end caps for maximum safety and long, flexible end-cap leads, built-in timer, and on/off switch for added convenience. Units measure 7-5/8" x 4-1/8". Each unit fits two T10 or T8 fluorescent bulbs (not included). Position bulbs on top of terrarium's metal screen cover. The timer can be set for three lighting periods - 10, 12 or 14 hours - to simulate the various seasonal daylight cycles found in nature. When a daytime cycle starts, it takes about 30 minutes for the light output of the bulb to reach 100 percent, simulating a natural dawn. At the end of each daytime cycle, it takes about 30 minutes to go from 100 percent light output to 0 percent, simulating a natural dusk. This is less stressful for the animals as it gives them time to retreat into their burrows or hiding places and even stimulates breeding behavior in many species of reptiles. Fits two T8 or T10 fluorescent bulbs Type Maximum wattage for each bulb Maximum length for each bulb 2 x 20W 20 Watts24" 2 x 30W 30 Watts36" 2 x 40W 40 Watts48" To attach T8 bulbs to a terrarium canopy, use convenient Coralife Heavy Duty Clips (sold separately). The clips are constructed of durable K-Resin to produce a rugged clip capable of withstanding harsh conditions of the terrarium. Please click on "More Information" for directions for use, safety, installation, maintenance, and more.

An electronic ballast, timer, and dusk-to-dawn simulator in one convenient light cycle unitGradually dims fluorescent tube bulbs for natural dusk and dawn effectNo flickering - less stressful for pet reptiles and amphibians Simulate natural lighting cycles, like sunrise and sunset, in your reptile's terrarium. Light cycle unit is more energy efficient than conventional ballasts and strip lights and eliminates flickering light, so there's less stress on reptiles. Innovative controllers feature water-resistant end caps for maximum safety and long, flexible end-cap leads, built-in timer, and on/off switch for added convenience. Units measure 7-5/8" x 4-1/8". Each unit fits two T10 or T8 fluorescent bulbs (not included). Position bulbs on top of terrarium's metal screen cover. The timer can be set for three lighting periods - 10, 12 or 14 hours - to simulate the various seasonal daylight cycles found in nature. When a daytime cycle starts, it takes about 30 minutes for the light output of the bulb to reach 100 percent, simulating a natural dawn. At the end of each daytime cycle, it takes about 30 minutes to go from 100 percent light output to 0 percent, simulating a natural dusk. This is less stressful for the animals as it gives them time to retreat into their burrows or hiding places and even stimulates breeding behavior in many species of reptiles. Fits two T8 or T10 fluorescent bulbs Type Maximum wattage for each bulb Maximum length for each bulb 2 x 20W 20 Watts24" 2 x 30W 30 Watts36" 2 x 40W 40 Watts48" To attach T8 bulbs to a terrarium canopy, use convenient Coralife Heavy Duty Clips (sold separately). The clips are constructed of durable K-Resin to produce a rugged clip capable of withstanding harsh conditions of the terrarium. Please click on "More Information" for directions for use, safety, installation, maintenance, and more.

Safely supends zoo med clamp lamps above terrarium. for 10 15 20 gallon terrariums.

Product Details
Extend lamp stand so that it hangs over terrarium. hang clamp lamp on stand.
Blk
Metal

Fluorescent and halogen combination terrarium canopyCombines both heat and light in one convenient fixtureFeatures heavy-duty, rigid anodized aluminum housing with built-in reflectorDurable aluminum canopy accommodates two fluorescent bulbs and one to two 35W halogen lamps. Provides optimal levels of UV, visual light, and heat in one canopy. This reptile light fixture easily mounts on front and/or back of screen cover. Two power cords and switches allow for individual control of both light sources. Use with fluorescent bulbs and 35 Watt Sun Glo Halogen Daylight Lamp. The halogen light increases the ambient air temperature in the terrarium. Bulbs sold separately. Canopy # of fluorescent# of halogen 18" 21 24" 22 ---> 36" 22Please click on "More Information" for installation instructions.

Fluorescent and halogen combination terrarium canopyCombines both heat and light in one convenient fixtureFeatures heavy-duty, rigid anodized aluminum housing with built-in reflectorDurable aluminum canopy accommodates two fluorescent bulbs and one to two 35W halogen lamps. Provides optimal levels of UV, visual light, and heat in one canopy. This reptile light fixture easily mounts on front and/or back of screen cover. Two power cords and switches allow for individual control of both light sources. Use with fluorescent bulbs and 35 Watt Sun Glo Halogen Daylight Lamp. The halogen light increases the ambient air temperature in the terrarium. Bulbs sold separately. Canopy # of fluorescent# of halogen 18" 21 24" 22 ---> 36" 22Please click on "More Information" for installation instructions.